How Long Does Double Glazing Last in Perth? Lifespan and Warranty

How Long Does Double Glazing Last in Perth? Lifespan and Warranty

Updated

Double glazing is sold on the assumption that it will outlast most other components in a Perth home. The marketing language tends to leave the actual numbers vague. “Decades” of performance. “Lifetime” of quality. “Industry-leading” warranty.

This article gets specific. The IGU seal has a real expected lifespan. The frame has a separate lifespan. Both depend on the spec, the installation quality, and Perth’s specific climate stresses. The warranty should cover the parts most likely to fail. Drawn from AGWA technical fact sheets, Australian manufacturer technical data, Australian glazier industry observations on Perth conditions, and the Heritage Act / NCC framework for Australian glazing.

The Two Things That Determine How Long Double Glazing Lasts

Double glazing is a composite product. Two components have meaningfully different lifespans.

The IGU seal. The Insulated Glazing Unit is two panes of glass separated by a spacer bar (aluminium or warm-edge composite), sealed at the perimeter with a primary seal (typically polyisobutylene, PIB) and a secondary seal (silicone or polysulfide), with desiccant in the spacer to absorb residual moisture. The seal’s job is to hold the gas fill (argon or air) and keep moisture out. When the seal fails, the unit fogs.

The frame. Aluminium frame extrusion itself has very long service life, particularly in Perth’s relatively low-humidity climate. The powder-coat finish has a shorter lifespan depending on UV exposure and coastal salt. The hardware (locks, rollers, hinges) wears mechanically and is the most likely service point.

Expected lifespan ranges:

ComponentTypical lifespanNotes
IGU seal15 to 25 yearsAsk supplier for their specific IGU seal warranty terms
Aluminium frame structure30+ yearsPowder-coat finish 10 to 25 years depending on exposure
uPVC frame30+ yearsLess UV-sensitive than powder-coat aluminium
Hardware (locks, rollers)10 to 15 years before serviceHardware manufacturers carry their own warranty terms; confirm with supplier
Powder-coat finish10 to 25 yearsCoastal exposure reduces; west-facing reduces
Glass itself50+ yearsAnnealed, toughened or laminated, no degradation in normal use

The two failure points that matter are the IGU seal and the powder-coat finish. Everything else outlasts most ownership periods.

What the IGU Seal Is and Why It Eventually Fails

The IGU seal is a perimeter assembly. The primary seal (PIB) bonds the glass to the spacer; the secondary seal (silicone or polysulfide) sits outside the PIB and provides structural strength and a moisture barrier. The spacer holds desiccant beads that absorb any moisture that does penetrate, keeping the gas-filled cavity dry.

Failure happens when the seals can no longer hold. Several pathways:

  • UV degradation of the secondary seal over years of exposure
  • Thermal cycling stress as the unit expands and contracts daily
  • Water ingress at the perimeter from poor sill design or drainage
  • Mechanical stress from frame movement, building settlement, or impact
  • Manufacturing defects in original seal application

Perth’s climate accelerates a couple of these pathways. The summer UV index averages 12 (Extreme rating per Bureau of Meteorology), which degrades seals faster than cooler southern Australian cities. Perth averages 26 days per year above 35 degrees and 5 days above 40 degrees, which drives thermal cycling.

The realistic lifespan range for an IGU seal in a Perth installation is 15 to 25 years for a well-specified and well-installed unit. Lower end if exposure is harsh (direct west-facing, no eave, edge exposed to summer sun); upper end with good shading and quality installation.

What Seal Failure Looks Like

Two visible signs:

Fogging between the panes. Moisture has entered the cavity and is condensing on the inner surface of the outer pane or the outer surface of the inner pane. The fog typically appears in the morning, may clear during the day, and reappears overnight. The desiccant is saturated and can no longer absorb the moisture.

Water droplets or visible water lines between the panes. Late-stage seal failure. The cavity has accumulated enough moisture to form visible water. This is unmistakable and the unit needs replacement.

Once a seal fails, the cavity gas (typically argon) is lost. The unit still has two panes of glass with an air gap and provides some insulation, but the U-value reverts to closer to standard double glazing without low-e benefit, and the SHGC may shift depending on whether the coating is on the failed cavity side.

Seal failure is repaired by replacing the IGU, not by re-sealing. Quality suppliers replace under warranty if the unit is within the warranty period.

How Perth’s Climate Affects IGU Lifespan Compared to Cooler Cities

Three Perth-specific factors:

UV exposure. Perth’s annual average UV index is 7.2, with summer averaging 12 (Extreme). This is higher than Melbourne, Sydney or Adelaide. UV is the primary degradation mechanism for the secondary seal.

Heat extremes. Perth averages 26 days above 35 degrees and 5 days above 40 degrees per year (Bureau of Meteorology, Perth Metro station). The all-time metro record is 46.7 degrees. Thermal cycling stress on the seal increases with the temperature range.

West-facing exposure. Perth homes typically have one or more west-facing rooms taking direct afternoon sun for hours. Edge exposure of the IGU on west-facing windows is the highest-stress condition for seal life.

In cooler climates (Melbourne, Hobart, Canberra), the same IGU might last 20 to 30 years. In Perth, the realistic range is 15 to 25 years, with the lower end for harsh exposures. Australian glazier industry observation supports this range based on Perth field experience. Our does double glazing keep Perth homes cooler in summer guide covers why west-facing windows take the most stress.

What Causes Premature Seal Failure

Premature failure means seal failure before 10 years. The common causes:

  • Poor drainage design that allows water to pool around the IGU perimeter
  • Direct sunlight on the seal edge in installations without adequate frame depth or shading
  • Manufacturing defects in the primary or secondary seal application
  • Improper handling at install that damages the seal during transport or fitting
  • Frame movement from building settlement, particularly in first-year settling of new construction
  • Impact damage from external sources (cricket ball, falling branch) that may not crack the glass but stresses the seal

Quality suppliers detect manufacturing defects in QA before shipping. Quality installers handle the IGU correctly during install. The drainage and shading questions are about specification at the consultation stage. Our choosing a double glazing company Perth guide covers what to ask about install quality, and the window replacement Perth process guide walks through what good installation looks like.

What the Aluminium Frame Lifespan Looks Like

The aluminium extrusion itself lasts decades in normal use. The structural integrity does not degrade through UV or thermal cycling in any meaningful way. Coastal salt exposure can affect untreated aluminium surfaces over time but powder-coated frames are protected.

The variable is the powder-coat finish. Standard Dulux powder-coat finishes typically last 10 to 25 years before noticeable fading, particularly on west-facing surfaces in Perth. Penot Double Glazing carries a 10-year warranty on frames; the powder-coat finish is typically covered by a pass-through warranty from the coating manufacturer. Ask the supplier to confirm the specific powder-coat warranty terms in writing. Beyond the warranty period, the powder coat may still look fine for many years.

Re-powder-coating an existing frame is technically possible but rarely worthwhile economically. By the time a frame finish fails, the IGU is often near end-of-life too, and full window replacement is usually the better answer.

What a Good Double Glazing Warranty Covers

Warranty terms vary by supplier. A good position to look for:

  • 10 years on the frame as a baseline. Penot Double Glazing carries a 10-year warranty on frames. Ask specifically about IGU seal, hardware and installation warranty terms at the quote stage.
  • Clear powder-coat finish coverage. Typically a pass-through from the coating manufacturer (Dulux or equivalent), covering fading, peeling, corrosion or chalking under normal exposure. Confirm the specific term in writing.
  • Clear hardware warranty terms. Hardware manufacturers carry their own warranty terms, typically 1 to 7 years. The supplier should confirm what they cover and what is referred to the hardware manufacturer.
  • Install workmanship cover for a defined period with clear definition of what counts as install vs product defect. The Australian Consumer Law covers reasonable workmanship independently of the contract, but specific written terms still matter at claim stage.
  • Transferable to the next owner. Not universal; worth asking if the property might sell within the warranty period.
  • Direct supplier handling. Under the Australian Consumer Law, the customer’s primary remedy is against the seller, not the manufacturer. A good supplier handles the claim directly rather than referring the customer to deal with the IGU or hardware manufacturer.

The Penot Double Glazing windows range carries the 10-year frame warranty as standard. Confirm the specific terms across glass, hardware and installation at the quote stage.

How to Tell Whether a Supplier’s Warranty Is Worth the Paper

Red flags in warranty wording:

  • One number for everything. “10 years on the window” without specifying what is and isn’t covered.
  • Manufacturer-only coverage on glass claims. The customer is sent to the IGU manufacturer, when under Australian Consumer Law the seller is the customer’s primary remedy.
  • Short or undefined workmanship coverage. No stated period, or a period much shorter than other components of the warranty.
  • Excludes powder-coat finish. The supplier warrants only the glass, leaving the frame finish unprotected.
  • Excludes hardware. Hardware warranty handed off to the manufacturer with no supplier coordination.
  • Voids on sale. Warranty terminates if the property is sold, removing the resale value of the upgrade.
  • No AGWA membership. Without the third-party audit, the warranty depends entirely on the supplier’s continued operation and goodwill.

A good warranty is specific, AGWA-backed, and transferable where possible.

What to Do If a Sealed Unit Fails Within the Warranty Period

The process:

  • Document the failure. Photograph the fogging or condensation between panes. Note when it first appeared and the affected window(s).
  • Contact the supplier directly. Penot Double Glazing’s contact page lists 1300 121 603 and the email path. AGWA members commit to a fair claim process under the Code of Conduct.
  • Site inspection. The supplier sends a technician to inspect, confirm the failure, and assess whether the cause is covered (seal failure typically is; impact damage may not be).
  • Replacement. A new IGU is manufactured and installed in the existing frame. The replacement carries the balance of the original warranty period plus any extension specific to the replacement unit.
  • Follow-up. A post-install inspection confirms the new unit is performing.

Project timeline is confirmed at claim stage. The home stays functional throughout.

Lifespan Summary Table

Note: “Standard spec” = standard aluminium frame with clear or hard-coat low-e IGU. “Premium spec” = thermally broken aluminium with soft-coat low-e and argon fill.

ComponentStandard specPremium specNotes
IGU seal15 to 20 years20 to 25 yearsWarranty 10 years AGWA standard. Cooler southern Australian climates can extend to 25 to 30 years.
Aluminium frame structure30+ years30+ yearsLifetime warranty typical
Powder-coat finish10 to 20 years15 to 25 years10-year warranty typical
uPVC frame30+ years30+ yearsLess UV-sensitive than aluminium powder-coat
Hardware (locks, rollers)10 to 15 years15 to 20 yearsService intervals every 5 to 7 years
Seals (perimeter gasket)12 to 15 years15 to 20 yearsThe window-to-frame perimeter gasket (separate from the IGU seal) is replaceable as a service item.

Source: Australian Standards, AGWA technical fact sheets, and Australian manufacturer technical data.

Where Penot Double Glazing Fits

Penot Double Glazing is a full AGWA member based at 92 Beechboro Rd S, Bayswater WA 6053, supplying windows and doors with a 10-year warranty on frames. Ask about IGU seal, hardware and installation warranty terms at the quote stage. Warranty claims are handled directly by the in-house team rather than referred to manufacturers.

For a quote with the full warranty terms in writing, book a free in-home assessment. Compare options across the wider double glazed windows Perth range including the doors range, call 1300 121 603, or visit the Bayswater showroom at 92 Beechboro Rd S. Our choosing a double glazing company guide covers the seven questions to ask any supplier, and the 30 questions answered guide covers the broader topic.

How Long Do Double Glazed Windows Actually Last in Perth?

The IGU seal typically lasts 15 to 25 years under good installation and Perth climate conditions. The aluminium frame lasts considerably longer, 30 years or more for the structural extrusion with the powder-coat finish typically lasting 10 to 25 years depending on exposure. Ask your supplier for their specific warranty terms on the IGU seal, frame, hardware and installation at the quote stage.

What Does Double Glazing Seal Failure Look Like?

Fogging or condensation between the two panes of glass that does not wipe away. Sometimes visible water droplets between the panes after temperature changes. Once the seal fails, the gas fill is lost and the unit performs more like a single glazed window for thermal purposes. The failed unit must be replaced; it cannot be re-sealed.

Why Does Perth’s Climate Affect Double Glazing Lifespan?

UV exposure and heat are the primary stressors. Perth’s average summer UV index of 12 (Extreme rating per Bureau of Meteorology) and 26 days per year above 35 degrees accelerates seal degradation compared to cooler southern cities. The most exposed surface is the perimeter of the IGU where the seal sits, which is why installation drainage design and frame depth matter for seal lifespan.

What Should a Perth Double Glazing Warranty Cover?

Look for at minimum: 10 years on the frame, clear terms on IGU seal, hardware and install workmanship (ask at the quote stage), and confirmation of whether the warranty is transferable to the next owner. Penot Double Glazing carries a 10-year frame warranty. Anything less specific than component-by-component coverage is a red flag. Under Australian Consumer Law the supplier handles warranty claims directly; a warranty that refers customers to the IGU or hardware manufacturer is contrary to that protection.